| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Heat Treatment of drill collar adopts unique medium frequency inductance heating method for hardening and tempering,during which steel parts rotate continuously to get even heating.In the course of hardening,it adopts anular internal and external injection water cooling method to get even and high strength.Drilling collar material after whole length heat treatment could guarantee 285-341 Brinell hardness 1" below the surface of the pipe body.
Non Magnetic Properties:
Relative Permeability: Max 1.005
Hot Spot / Field Gradient: MAX ±0.05μT
Special Treatment on ID: Roller Burnishing
After roller burnishing, a compressive layer come into being, the advantages as follows:
Increase the corrosion resistance properties,
Increase the surface hardness of bore up to HB400,
Increase surface finish of bore to Ra≤3.2 μm,
Test and Inspection carried out on each bar during production of NMDC, Stabilizer and MWD parts.
Chemical Composition,
Tensile Test,
Impact Test,
Hardness Test,
Metallographic Test (Grain Size),
Corrosion Test (According to ASTM A 262 Practice E),
Ultrasonic Test over the whole length of the bar (According to ASTM A 388), Relative maganetic permeability Test,
Hot spot Test, Dimensional Inspection, etc.
A. Slick Drill Collar
Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard.
B. Spiral Drill Collar
Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144
C. Spiral Drill Collar With Elevator Groove And Slip Groove
Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customers' requests.
D. Non-magnetic Drill Collar
The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
Technical specification and parameters
|
Drill Collar Number |
O.D |
I.D |
Length |
Bevel Diameter |
Refbend g Strength ratio |
||
|
mm |
in |
mm |
in |
||||
|
NC23-31 |
79.4 |
3 1/8 |
31.8 |
1 1/2 |
9150 |
76.2 |
2.57:1 |
|
NC26-35(2 3/8 IF) |
88.9 |
3 1/2 |
38.1 |
1 1/2 |
9150 |
82.9 |
2.42:1 |
|
NC31-41(2 7/8 IF) |
104.8 |
4 1/8 |
50.8 |
2 |
9150 |
100.4 |
2.43:1 |
|
NC35-47 |
120.6 |
4 3/4 |
50.8 |
2 |
9150 |
114.7 |
2.58:1 |
|
NC38-50(3 1/2 IF) |
127.0 |
5 |
57.2 |
2 1/4 |
9150 |
121.0 |
2.38:1 |
|
NC44-60 |
152.4 |
6 |
57.2 |
2 1/4 |
9150&9450 |
144.5 |
2.49:1 |
|
NC44-60 |
152.4 |
6 |
71.4 |
2 13/16 |
9150&9450 |
144.5 |
2.84:1 |
|
NC44-62 |
158.8 |
6 1/4 |
57.2 |
2 1/4 |
9150&9450 |
149.2 |
2.91:1 |
|
NC46-62(4IF) |
158.8 |
6 1/4 |
71.4 |
2 13/16 |
9150&9450 |
150.0 |
2.63:1 |
|
NC46-65(4IF) |
165.1 |
6 1/2 |
57.2 |
2 1/4 |
9150&9450 |
154.8 |
2.76:1 |
|
NC46-65(4IF) |
165.1 |
6 1/2 |
71.4 |
2 13/16 |
9150&9450 |
154.8 |
3.05:1 |
|
NC46-67(4IF) |
171.4 |
6 3/4 |
57.2 |
2 1/4 |
9150&9450 |
159.5 |
3.18:1 |
|
N50-67(4 1/2 IF) |
171.4 |
6 3/4 |
71.4 |
2 13/16 |
9150&9450 |
159.5 |
2.37:1 |
|
NC50-70(4 1/2 IF) |
177.8 |
7 |
57.2 |
2 1/4 |
9150&9450 |
164.7 |
2.54:1 |
|
NC50-70(4 1/2 IF) |
177.8 |
7 |
71.4 |
2 13/16 |
9150&9450 |
164.7 |
2.73:1 |
|
NC50-72(4 1/2 IF) |
184.2 |
7 1/4 |
71.4 |
2 13/16 |
9150&9450 |
169.5 |
3.12:1 |
|
NC56-77 |
196.8 |
7 3/4 |
71.4 |
2 13/16 |
9150&9450 |
185.3 |
2.70:1 |
|
NC56-80 |
203.2 |
8 |
71.4 |
2 13/16 |
9150&9450 |
190.1 |
3.02:1 |
|
6 5/8 REG |
209.6 |
8 1/4 |
71.4 |
2 13/16 |
9150&9450 |
195.7 |
2.93:1 |
|
NC61-90 |
228.6 |
9 |
71.4 |
2 13/16 |
9150&9450 |
212.6 |
3.17:1 |
|
7 5/8 REG |
241.3 |
9 1/2 |
76.2 |
3 |
9150&9450 |
223.8 |
2.81:1 |
|
NC70-97 |
247.6 |
9 3/4 |
76.2 |
3 |
9150&9450 |
232.8 |
2.57:1 |
|
NC70-100 |
254 |
10 |
76.2 |
3 |
9150&9450 |
237.3 |
2.81:1 |
|
8 5/8 REG |
279.4 |
11 |
76.2 |
3 |
266.7 |
2.84:1 |
|
Remarks: We can produce drill pipe as per your request.
Raw Material performances
|
Steel Grade |
Yield Strength |
Tensile Strength |
||
|
Min(Mpa) |
Max(Mpa) |
Min(Mpa) |
Max(Mpa) |
|
|
E-75 |
517 |
724 |
100 |
689 |
|
G105 |
724 |
931 |
793 |
|
|
S135 |
931 |
1138 |
1000 |
|
|
R780 |
520 |
666 |
780 |
876 |
1.New drill pipe should be pasted oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to clients' special requirements
| Size | Length in |
Upper box connection | Lower pin connection | I.D. | Driving section | |||||||
| mm | in | Type(LH) | O.D. | Thread | O.D. | Cross flat | For square kelly | Cross corner for hexa kelly | ||||
| Std | optional | Std | optional | |||||||||
| 63.5 | 2 1/2 | 12.19 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC26 | 85.7 | 31.8 | 63.5 | 83.3 | |
| 76.2 | 3 | 12.19 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC31 | 104.8 | 44.4 | 76.2 | 100.0 | 85.7 |
| 88.9 | 3 1/2 | 12.19 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC38 | 120.6 | 57.2 | 88.9 | 115.1 | 100.8 |
| 108.0 | 4 1/4 | 12.9 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC46 | 158.8 | 71.4 | 108.0 | 141.3 | 122.2 |
| 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC50 | 161.9 | 71.4 | 108.0 | 141.3 | 122.2 | |||
| 133.4 | 5 1/4 | 12.9 | 6 5/8REG | 196.8 | 5 1/2FH | 177.8 | 82.6 | 133.3 | 175.4 | 151.6 | ||
| 6 5/8REG | 196.8 | NC56 | 177.8 | 82.6 | 133.3 | 175.4 | 151.6 | |||||
Shandong Yacheng Petroleum Technology Co.,Ltd.(YCPT) is located in Dongying city, the second largest oilfield in China. Yacheng Petroleum has over 20 years of experience in research,development and manufacturing of oil&gas drilling equipment with experienced technical team,professional sales and after-sales service teams.
Yacheng Petroleum provides wide range of products,including Handling Tools,Drilling Tools,Mud Pump and Spare Parts,Solid Control Equipment, Flowline Products,Fishing tools,etc.Yacheng Petroleum has established a complete quality control system, all products & equipment manufactured as per international standard ISO 9001 and API standard.
Based on our talented experienced technician team and sincerely marketing strategy, Yacheng Petroleum have exported our products to more than 30 countries in the world like Russia, Iran, UAE, USA, Chile... and so on.The positive feedback from our clients are encouraging us to do much better and more strict on self-requirement. We will continue to provide quality products with favorable prices to all customers!
Yacheng Petroleum is striving for being an international drilling equipment solution provider and quality equipment provider in the world.
Welcome to visit our company. Let's open the delightful business cooperation!
Q:How can I place order?
A: You can contact us by email or social media like WhatsApp on the order detail or place order on line.
Q:How about the payment?
A: For new clients, advance payment(30%-100% of total amount) is required, the balance need to be paid before the delivery after your inspection.
Q:How can I pay you?
A: By T/T (Telegraphic Transfer) or L/C (Letter of Credit). After you receive the PI, you can make the payment through your bank as per the terms mentioned in PI.
Q: What's the order procedure?
A: First we discuss order details, production details by email ,TM or other social media; then we issue you an PI for your confirmation. You will be requested to make full payment or deposit before we go into production. After we get the deposit, we start to process the order. Depending on the products you order, we usually a couple of days or even moths to complete production if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we shall arrange the shipment for you.
Q: How do you deal with defective products received by the clients?
A: If there are some defective items, we usually credit to our customer or replace them in next shipment.
){kind=link}