| Customization: | Available |
|---|---|
| Manufacturing Process: | Forging |
| Surface Treatment: | Polishing |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Safety Clamps are necessary tools for handling drill collars, flush joint pipes and small shoulder pipes. They could adjust pipes of different sizes by changing the quantity of chain links. They are designed and manufactured according to API Spec 7K.
The Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered slip which acts as a gripping member, much like a tapered rotary slip, and each slip is held in a retracted position on the taper by spring tension. When the clamp is tightened, each small slip take a firm initial grip on the surface of the pipe. Should the pipe start to fall, or should load increase occur against the slips, the taper mounting causes each slip to wedge tighter against the surface of the pipe to increase the grip or lock the pipe against further movement.
Gripping pressure is always uniform around the pipe so there is little danger of crushing thin-walled pipe or damaging the pipe surface. And, since each link, complete with tapered slip, is interchangeable as a unit, the Safety Clamp is readily adaptable to virtually any diameter. Each link changes the effective gripping diameter of the clamp one inch. All parts are made of alloy steel, heat-treated for strength and gripping ability.
1.Type T
2.Type C
3.Type MPPI 7K SDS SDML SDXL Rotary Drill Pipe Slips
Drill pipe slips have a taper of 4"/foot on diameter and other suitable dimensions to permit operation in standard master bushings. The right size drill pipe slips must always be used for the size drill pipe being handled. Slips that are smaller than the drill pipe will damage the pipe and the corners of slips as well as risk dropping a string of drill pipe entirely. It is paramount that the right size is chosen and used to avoid catastrophic damage to the drill string. Slips that are too large will not contact the pipe all the way around. This risks dropping the pipe and destroys the center part of the gripping surface.
Drill pipe slips Type SD can accommodate drill pipes from 2-3/8 to 7 inch. They are classified as type Short(SDS), Medium(SDML), Extra Long(SDML).SDS slips are designed for shallow hole drilling, SDML slips are the perfect choice for all medium depth drilling and SDXL slips are designed for deep drilling. The slips are designed and manufactured in API Spec 7K and SY/T 5049 Slips for well drilling. It is suitable to handle the drill rods during the oil well drilling operations for the exploration of petroleum and natural gases ,It is an essential tool for coupling and uncoupling.
| Type | Pipe O.D(in) | No. of Chain Links |
| WA-C | 3 1/2-4 5/8 | 7 |
| 4 1/2- 5 5/8 | 8 | |
| 5 1/2-6 5/8 | 9 | |
| 6 1/2- 7 5/8 | 10 | |
| 7 1/2-8 5/8 | 11 | |
| 8 1/2- 9 5/8 | 12 | |
| 9 1/2- 10 5/8 | 13 | |
| 10 1/2-11 5/8 | 14 | |
| 11 1/2-12 5/8 | 15 | |
| 12 1/2- 13 5/8 | 16 | |
| 13 1/2- 14 5/8 | 17 | |
| 14 1/2- 15 5/8 | 18 |
| Type | Pipe O.D(in) | No. of Chain Links |
| WA-T | 1 1/8-2 | 4 |
| 2 1/8-3 1/4 | 5 | |
| 3 1/2-4 1/2 | 6 |
1) About Packing
Inner packing: white box, color boxes (upon request), Outer packing: cartons or pallets
2) Terms of payment:
We accept T/T,L/C
3)Terms of Shipment:
About 30 days after receiving the advance payment,or according to both parties agreement
4)Ports of shipment:
Tianjin,Qingdao, shanghai or other required Port, by sea or air
5)Guarantee:
One year since delivery.
6)Inspection:
100% testing before delivery.
Shandong Yacheng Petroleum Technology Co.,Ltd.(YCPT) is located in the second largest oilfield in Dongying city. We are the subsidiary of Xincheng Petroleum of Xincheng Petroleum Group,which was founded since 2003. We are first class supplier in vendor list of CNPC,SINOPEC,and CNOOC,and member of CCOIC, CCPIT and so on.
We have 19 years of experience in research,development and manufacturing of oil drilling equipment and drilling string, We have professional sales and after-sales service teams We are committed to develop, manufacture and supply of oilfield equipment, like oil and gas Gate Valve, Mud Pump and Spare Parts, Handling Tools,Drilling String, Well Control Equipments.
We have established a complete quality control system, all products & equipment manufactured as per international standard ISO 9001 and API standard. Based on our talented experienced technician team and sincerely marketing strategy, we have exported our products to more than 30 countries. The positive feedback from our clients are encouraging us to do much better and more strict on self-requirement. We will continue to provide quality products with favorable prices to all customers!
Welcome to Dongying city and visit our company. Let's open the delightful business cooperation!
1. who are we?
We are based in Shandong Province, China, start from 2016,sell to Eastern Europe(17.00%),Mid East(16.00%),Southeast Asia(16.00%),South America(15.00%),North America(14.00%),Eastern Asia(10.00%),Western Europe(8.00%),Oceania(2.00%),Africa(2.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
API 6A Gate Valve / Mud Pump Spare Parts / Handling Tools / Drilling String / API 16A Well Control Equipments
4. why should you buy from us not from other suppliers?
we have been exporting drill pipe, handing tools,mud pump parts and well control equipments to well-known oil service companies in the world .We are the first class supplier of CNPC,SINOPEC,and CNOOC.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,Express Delivery;
Accepted Payment Currency:null;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Russian.
){kind=link}