| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Eaton Airlfex constricting clutches and brakes maximize performance in braking and tensioning applications. The drum style products expand radially inward when pressurized. The constricting tube forces friction shoes against an outer cylindrical drum surface.
VC elements are designed to excel in severe clutching and braking applications on heavy-duty equipment. There is no better product on the market when it comes to high starting loads and sustained slippage where heat generated tends to lower efficiency and shorten the operating life of conventional clutches.
Manufactured to produce high torque capacities that permit the use of smaller diameter units which lowers contact velocity on high-speed applications. Ventilated friction shoes enable the passage of cooling air to rapidly dissipate heat.
Standard Sizes:
| Cs Centrifugal Loss Constant (bar/rpm2) | 155 mm |
| G1 (in) | 8.91 A |
| L (Bolt) Size (mm) | 3.1 mm |
| Air Tube Cavity (in3) | Pintsch Bubenzer |
| G1 MM | 0.7 mm |
| Friction Area (in2) | 620 mm |
| Friction Area (cm2) | 282 mm |
| D25 (in) | 68 mm |
| G (in) | 750 kg |
| Lining Thickness New (mm) | 980 W |
| Nominal Voltage (DC) (20 ºC) | 110 V |
| Suitable Standards Intermediate Flanges | A800-1 |
| Maximum Speed | 2000 min-1 |
| Inertia | 1.0070 kg·m² |
| Diameter B-Side (d H7 max) | 140 mm |
| Actuation | Spring Applied, Elec |
| Dynamic Torque Rating | 10000 Nm; 7000 Nm; 8 |
| Length E | 795 mm |
| Length m | 310 mm |
| Length l1 | 255 mm |
| 51VC1600 408585 Eaton Airflex Industrial Clutch and Brakes part number reviews |
| 66VC16 Eaton Airflex Industrial Clutch and Brakes | Air Tube Cavity (in3):4; G1 (mm):416241; Mass (kg):44.86 in; 1139 mm; Friction Area (in2):1/2-13NC-2; G1 MM:837 lb·ft²; 35.27; L Dia MM:17.50 in; 445 mm; H7 MM:0.25 in; 6 mm; Friction Area (cm2):3; H2 (in):19.50 in; 495 mm; G1 Inch:13.00 in; 330 mm; Dimension J12:36.375 in; 923.9 mm; Size:338DC; Man |
| 60VC16 Eaton Airflex Industrial Clutch and Brakes | D2 (in):18.00 in; 455 mm; H6 MM:1726000 lb·in; 1950; G Inch:2950 lb; 1338 kg; D2 MM:7-148-300-103-0; G (in):475 rpm; H2 MM:4925 lb·ft²; 208 k; H6 (in):Wichita Clutch; Friction Lining Thickness New (in):Air Applied; G MM:705 rpm; H6 (mm):6540 lb; 2966 kg; |
| 46VC12 Eaton Airflex Industrial Clutch and Brakes | H7 MM:3870 lb; 1755 kg; D24 (mm):10615 lb·ft²; 448; L Dia MM:Air Applied; L Dia Inch:380 rpm; Lining Thickness Worn (mm):575 rpm; H7 Inch:TBD; D2 MM:Wichita Clutch; G1 MM:19.00 in; 480 mm; L (Bolt) Size (in):4921000 lb·in; 5559; H6 (in):11643 lb; 5281 kg; |
| 42VC65 Eaton Airflex Industrial Clutch and Brakes | Mass (kg):7.13 in; 181.1 mm; H7 MM:723 lb; 328 kg; G (in):21/32 in; 16.7 mm; H2 Inch:21.378/21.375 in; 54; Friction Area (cm2):262078 lb·in; 29610; H2 (in):209662 lb·in; 23265; H7 Inch:1650 rpm; G1 (mm):312 lb; 141.5 kg; D2 (in):11.75 in; 298.5 mm; D24 (in):3 - 1/2 NPT; Dimension J:0.31 in; 7.9 mm; |
| 38VC12 Eaton Airflex Industrial Clutch and Brakes | Friction Area (cm2):2.76 E-06 bar/rpm2;; D25 Inch:0.31 in; 8 mm; Cs Centrifugal Loss Constant (bar/rpm2):380 in²; 2451 cm²; D2 MM:28.375 in; 720.7 mm; D24 Inch:3/8-18 NPT; D24 (in):1200 rpm; Lining Thickness New (mm):8 mm; Friction Area (in2):140 in³; 2.3 dm³; D24 (mm):+0.000/-0.005 in; +0; D25 (mm) |
| 51VC16 Eaton Airflex Industrial Clutch and Brakes | Air Tube Cavity (dm2):Clutch only, Assembl; D2 MM:Wichita Clutch; D24 MM:Air Applied; |
| 33VC65 Eaton Airflex Industrial Clutch and Brakes | D24 Inch:102000 lb·in; 11524; H2 MM:Air Applied; G1 (mm):7-118-300-100-0; D25 MM:180 lb; 81.6 kg; Air Tube Cavity (dm2):43.2 lb·ft²; 1.821; Air Tube Cavity (in3):122000 lb·in; 13784; G1 Inch:1910 rpm; H2 Inch:80900 lb·in; 9140 N; L (Bolt) Size (in):4.75 in; 120 mm; L (Bolt) No (in):461 lb; 209 kg; M |
| 32VC1 Eaton Airflex Industrial Clutch and Brakes | D24 (in):Wichita Clutch; H7 Inch:22.498 in; D25 MM:6; Cs Centrifugal Loss Constant (bar/rpm2):64500 lb·in; D2 MM:10-7/64 in; Cs Centrifugal Loss Constant (psi/rpm2):A; L (Bolt) No (mm):21-3/8 in; Lining Thickness Worn (mm):20-1/2 in; D25 Inch:8-51/64 in; D2 Inch:118; Actuation:Air Applied; Number & |
| 14VC1 Eaton Airflex Industrial Clutch and Brakes | D2 MM:29.50 in; 749.3 mm; H2 (mm):0.168; H7 (in):0.12; Air Tube Cavity (dm2):8.00 in; 203.2 mm; D2 Inch:132; G Inch:1.50 in; 38.1 mm; G1 (mm):1967 lb; 892 kg; H2 (in):500 rpm; G1 MM:1.75 in; 44.5 mm; L (Bolt) No (in):2; Dimension G:1.00 in; 25.40 mm; Dynamic Torque Rating (80 psi/5.5 bar):726000 lb· |
| 42VC12 Eaton Airflex Industrial Clutch and Brakes | G1 (mm):3- 1/2 NPT; L (Bolt) Size (in):233 hp; 174 kW; D24 MM:Wichita Clutch; D2 (mm):1.75 in; 44.5 mm; D25 Inch:8.00 in; 203 mm; D2 (in):32.747/32.750 in; 83; H2 (in):8.00 in; 203.2 mm; J (kg.m2):2.50 in; 63.5 mm; H6 (in):Air Applied; L (Bolt) No (mm):14.13 in; 358.9 mm; Dimension T:15.13 in; 358.9 |
| 28VC1 Eaton Airflex Industrial Clutch and Brakes | G MM:16; D25 (mm):24.22 in; 615 mm; D2 Inch:Air Applied; D2 MM:756 lb; 342 kg; D25 (in):1104 lb·ft²; 46.37; H7 MM:23.87 in; 606 mm; Lining Thickness Worn (mm):22.13 in; 562 mm; H2 (mm):34.000 in; 863.6 mm; G1 (mm):0.625 in; 15.9 mm; Air Tube Cavity (dm2):0.39 in; 10 mm; Dimension H2:32.750 in; 831.9 |
| 20VC1 Eaton Airflex Industrial Clutch and Brakes | Friction Lining Thickness New (in):16.25 in; 412.8 mm; L (Bolt) Size (mm):Wichita Clutch; H7 Inch:2.50 in; 63.5 mm; D24 MM:969 lb·ft²; 40.9 k; Lining Thickness New (mm):1" - 14NF; L (Bolt) No (mm):40; L (Bolt) Size (in):1400 rpm; H2 MM:700 rpm; D24 (in):1112 lb; 504 kg; G (mm):31.00 in; 787.4 mm; Bo |
| 52VC12 Eaton Airflex Industrial Clutch and Brakes | D24 MM:2150 rpm; G1 (mm):3 gpm; 11.4 dm³/min; H7 MM:Spring Applied, Air; G1 Inch:9 lb·ft²; 0.38 kg?; G (mm):30 hp; 22.4 kW; D2 (in):5600 lb·in; 632 Nm; L Dia Inch:2.50 in; 64 mm; Friction Area (in2):4; D25 (mm):0.81 in; 21 mm; G1 (in):6.68 in; 170 mm; Dimension D43:2.56 in; 65 mm; Size:108WCS; Inlet |
| 24VC1 Eaton Airflex Industrial Clutch and Brakes | G Inch:630 mm; Air Tube Cavity (dm2):220 kg; Friction Lining Thickness Worn (in):265 mm; H6 MM:380 mm; H2 (in):4100 Nm; H2 Inch:9700 Nm; H7 Inch:185 mm; H7 (mm):6600 Nm; Cs Centrifugal Loss Constant (bar/rpm2):530 mm; H7 (in):Ed 121/6 for 19500 N; Actuation:Spring Applied, Elec; Manufacturer:Pintsch |
| 16VC1 Eaton Airflex Industrial Clutch and Brakes | H2 (in):63 hp; 47 kW; D24 (mm):8.375/8.378 in; 212.; D2 (mm):17/32 in; 13.5 mm; Air Tube Cavity (in3):0.25 in; 6.4 mm; D25 Inch:24 in³; 0.4 dm³; D24 MM:4.38 in; 111.3 mm; G Inch:15 gpm; 57 lpm; H2 MM:2.25 in; 57.2 mm; G MM:11.75 in; 288.5 mm; Air Tube Cavity (dm2):96 hp; 72 kW; Number of Bolt Holes: |
| 37VC65 Eaton Airflex Industrial Clutch and Brakes | H6 (mm):0.0037 kg·m²; G1 (in):30 º; D24 Inch:28 mm; 32 mm; 38 mm; G1 Inch:253 mm; 303 mm; D2 MM:128 W; Friction Area (cm2):6000 min-1; L (Bolt) No (mm):96 mm; D24 (in):Spring Applied, Elec; L (Bolt) No (in):141 mm; J (kg.m2):160 Nm; Weight:28 kg; Length s:15 mm; Manufacturer:Pintsch Bubenzer; Nomina |
|
Model
|
Rotate speed
r/min
|
Torque
N.m
|
Working pressure
Mpa
|
Pneumatic
|
||
|
Limited
|
Rated
|
Limited
|
Rated
|
volumetric
|
||
|
LT500/200
|
1312-1578
|
758-912
|
17110-24970
|
11406-16646
|
0.7-1.0
|
3*2
|
|
LT500/250
|
1586-1701
|
916-983
|
23390-26900
|
15590-17930
|
0.7-0.8
|
3*5
|
|
LT600/250
|
1281-1544
|
740-892
|
32200-46710
|
21466-31140
|
0.7-1.0
|
4*2
|
|
LT700/250
|
1181-1344
|
660-793
|
48200-69910
|
32100-47300
|
0.7-1.0
|
4.2*2
|
|
DY700/135
|
1569-1890
|
907-1092
|
24560-35360
|
16170-23750
|
0.7-1.0
|
4
|
|
LT800/250
|
1016-1224
|
587-707
|
54240-78660
|
36160-52440
|
0.7-1.0
|
4.66*2
|
|
LT900/250
|
903-1087
|
522-628
|
68000-98930
|
45467-65953
|
0.7-1.0
|
3*2
|
|
LT1070/200
|
932-1123
|
539-668
|
84600-122670
|
56400-81790
|
0.7-1.0
|
3.0
|
|
LT1170/250
|
765-820
|
442-474
|
117740-134130
|
78490-89420
|
0.7-0.8
|
5.7
|
|
LT1120/300
|
----
|
----
|
184500-263250
|
123000-175500
|
0.7-1.0
|
3.96*2
|
|
LT1250/300
|
----
|
----
|
229500-327000
|
153000-218000
|
0.7-1.0
|
4.4*2
|
|
LT965*305
|
782-957
|
452-563
|
99680-142800
|
78145-96755
|
0.7-0.9
|
6.0
|
|
LT1168*305
|
739-890
|
435-524
|
108390-147700
|
88332-99700
|
0.7-0.9
|
11
|
1) About Packing
Inner packing: white box, color boxes (upon request), Outer packing: cartons or pallets
2) Terms of payment:
We accept T/T,L/C
3)Terms of Shipment:
About 30 days after receiving the advance payment,or according to both parties agreement
4)Ports of shipment:
Tianjin,Qingdao, shanghai or other required Port, by sea or air
5)Guarantee:
One year since delivery.
6)Inspection:
100% testing before delivery.
Shandong Yacheng Petroleum Technology Co.,Ltd.(YCPT) is located in the second largest oilfield in Dongying city. We are the subsidiary of Xincheng Petroleum of Xincheng Petroleum Group,which was founded since 2003. We are first class supplier in vendor list of CNPC,SINOPEC,and CNOOC,and member of CCOIC, CCPIT and so on.
We have 19 years of experience in research,development and manufacturing of oil drilling equipment and drilling string, We have professional sales and after-sales service teams We are committed to develop, manufacture and supply of oilfield equipment, like oil and gas Gate Valve, Mud Pump and Spare Parts, Handling Tools,Drilling String, Well Control Equipments.
We have established a complete quality control system, all products & equipment manufactured as per international standard ISO 9001 and API standard. Based on our talented experienced technician team and sincerely marketing strategy, we have exported our products to more than 30 countries. The positive feedback from our clients are encouraging us to do much better and more strict on self-requirement. We will continue to provide quality products with favorable prices to all customers!
Welcome to Dongying city and visit our company. Let's open the delightful business cooperation!
1. who are we?
We are based in Shandong Province, China, start from 2016,sell to Eastern Europe(17.00%),Mid East(16.00%),Southeast Asia(16.00%),South America(15.00%),North America(14.00%),Eastern Asia(10.00%),Western Europe(8.00%),Oceania(2.00%),Africa(2.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
API 6A Gate Valve / Mud Pump Spare Parts / Handling Tools / Drilling String / API 16A Well Control Equipments
4. why should you buy from us not from other suppliers?
we have been exporting drill pipe, handing tools,mud pump parts and well control equipments to well-known oil service companies in the world .We are the first class supplier of CNPC,SINOPEC,and CNOOC.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,Express Delivery;
Accepted Payment Currency:null;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Russian.
){kind=link}