| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | Support |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LWD/MWD Non-Magnetic Hang sub for well drilling, The following sets of specifications are common specifications and can be processed according to customer requirements.
|
Type |
Diameter (mm) |
Internal Diameter (mm) |
Internal bore length (mm) |
Lower-end aperture (mm) |
Total leagth (mm) |
|
MWD-121 |
121 |
88.2 |
1590 |
65 |
2500 |
|
MWD-172 |
172 |
111.5 |
1316 |
83 |
2073 |
|
MWD-175 |
175 |
127.4 |
1280 |
76 |
1690 |
|
MWD-203 |
203 |
127 |
1406 |
83 |
2048 |
A. Slick Drill Collar
Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard.
B. Spiral Drill Collar
Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144
C. Spiral Drill Collar With Elevator Groove And Slip Groove
Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customers' requests.
D. Non-magnetic Drill Collar
The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
Technical specification and parameters
|
Drill Collar Number |
O.D |
I.D |
Length |
Bevel Diameter |
Refbend g Strength ratio |
||
|
mm |
in |
mm |
in |
||||
|
NC23-31 |
79.4 |
3 1/8 |
31.8 |
1 1/2 |
9150 |
76.2 |
2.57:1 |
|
NC26-35(2 3/8 IF) |
88.9 |
3 1/2 |
38.1 |
1 1/2 |
9150 |
82.9 |
2.42:1 |
|
NC31-41(2 7/8 IF) |
104.8 |
4 1/8 |
50.8 |
2 |
9150 |
100.4 |
2.43:1 |
|
NC35-47 |
120.6 |
4 3/4 |
50.8 |
2 |
9150 |
114.7 |
2.58:1 |
|
NC38-50(3 1/2 IF) |
127.0 |
5 |
57.2 |
2 1/4 |
9150 |
121.0 |
2.38:1 |
|
NC44-60 |
152.4 |
6 |
57.2 |
2 1/4 |
9150&9450 |
144.5 |
2.49:1 |
|
NC44-60 |
152.4 |
6 |
71.4 |
2 13/16 |
9150&9450 |
144.5 |
2.84:1 |
|
NC44-62 |
158.8 |
6 1/4 |
57.2 |
2 1/4 |
9150&9450 |
149.2 |
2.91:1 |
|
NC46-62(4IF) |
158.8 |
6 1/4 |
71.4 |
2 13/16 |
9150&9450 |
150.0 |
2.63:1 |
|
NC46-65(4IF) |
165.1 |
6 1/2 |
57.2 |
2 1/4 |
9150&9450 |
154.8 |
2.76:1 |
|
NC46-65(4IF) |
165.1 |
6 1/2 |
71.4 |
2 13/16 |
9150&9450 |
154.8 |
3.05:1 |
|
NC46-67(4IF) |
171.4 |
6 3/4 |
57.2 |
2 1/4 |
9150&9450 |
159.5 |
3.18:1 |
|
N50-67(4 1/2 IF) |
171.4 |
6 3/4 |
71.4 |
2 13/16 |
9150&9450 |
159.5 |
2.37:1 |
|
NC50-70(4 1/2 IF) |
177.8 |
7 |
57.2 |
2 1/4 |
9150&9450 |
164.7 |
2.54:1 |
|
NC50-70(4 1/2 IF) |
177.8 |
7 |
71.4 |
2 13/16 |
9150&9450 |
164.7 |
2.73:1 |
|
NC50-72(4 1/2 IF) |
184.2 |
7 1/4 |
71.4 |
2 13/16 |
9150&9450 |
169.5 |
3.12:1 |
|
NC56-77 |
196.8 |
7 3/4 |
71.4 |
2 13/16 |
9150&9450 |
185.3 |
2.70:1 |
|
NC56-80 |
203.2 |
8 |
71.4 |
2 13/16 |
9150&9450 |
190.1 |
3.02:1 |
|
6 5/8 REG |
209.6 |
8 1/4 |
71.4 |
2 13/16 |
9150&9450 |
195.7 |
2.93:1 |
|
NC61-90 |
228.6 |
9 |
71.4 |
2 13/16 |
9150&9450 |
212.6 |
3.17:1 |
|
7 5/8 REG |
241.3 |
9 1/2 |
76.2 |
3 |
9150&9450 |
223.8 |
2.81:1 |
|
NC70-97 |
247.6 |
9 3/4 |
76.2 |
3 |
9150&9450 |
232.8 |
2.57:1 |
|
NC70-100 |
254 |
10 |
76.2 |
3 |
9150&9450 |
237.3 |
2.81:1 |
|
8 5/8 REG |
279.4 |
11 |
76.2 |
3 |
266.7 |
2.84:1 |
|
Remarks: We can produce drill pipe as per your request.
Raw Material performances
|
Steel Grade |
Yield Strength |
Tensile Strength |
||
|
Min(Mpa) |
Max(Mpa) |
Min(Mpa) |
Max(Mpa) |
|
|
E-75 |
517 |
724 |
100 |
689 |
|
G105 |
724 |
931 |
793 |
|
|
S135 |
931 |
1138 |
1000 |
|
|
R780 |
520 |
666 |
780 |
876 |
1.New drill pipe should be pasted oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to clients' special requirements
| Size | Length in |
Upper box connection | Lower pin connection | I.D. | Driving section | |||||||
| mm | in | Type(LH) | O.D. | Thread | O.D. | Cross flat | For square kelly | Cross corner for hexa kelly | ||||
| Std | optional | Std | optional | |||||||||
| 63.5 | 2 1/2 | 12.19 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC26 | 85.7 | 31.8 | 63.5 | 83.3 | |
| 76.2 | 3 | 12.19 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC31 | 104.8 | 44.4 | 76.2 | 100.0 | 85.7 |
| 88.9 | 3 1/2 | 12.19 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC38 | 120.6 | 57.2 | 88.9 | 115.1 | 100.8 |
| 108.0 | 4 1/4 | 12.9 | 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC46 | 158.8 | 71.4 | 108.0 | 141.3 | 122.2 |
| 6 5/8REG | 4 1/2REG | 196.8 | 146.0 | NC50 | 161.9 | 71.4 | 108.0 | 141.3 | 122.2 | |||
| 133.4 | 5 1/4 | 12.9 | 6 5/8REG | 196.8 | 5 1/2FH | 177.8 | 82.6 | 133.3 | 175.4 | 151.6 | ||
| 6 5/8REG | 196.8 | NC56 | 177.8 | 82.6 | 133.3 | 175.4 | 151.6 | |||||
We shandong yacheng petroleum technology are established in 2003 year, located in Dongying city, shengli oilfield,which is second largest oilfield of China.
1) About Packing Inner packing: white box, color boxes (upon request), Outer packing: cartons or pallets
2) Terms of payment: We accept T/T,L/C
3)Terms of Shipment: About 30 days after receiving the advance payment,or according to both parties agreement
4)Ports of shipment: Tianjin,Qingdao, shanghai or other required Port, by sea or air
5)Guarantee: One year since delivery.
6)Inspection: 100% testing before delivery.
){kind=link}